DTC 62-78

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 62-78,63-78: DSP Error
63-78 - DSP Error

DESCRIPTION





INSPECTION PROCEDURE

NOTICE:
* These DTCs may be output even if there is no malfunction.
* If these DTCs are detected frequently, replace the radio receiver.

HINT
After the inspection is completed, clear the DTCs.

PROCEDURE

1. CLEAR DTC

(a) Clear the DTCs Reading and Clearing Diagnostic Trouble Codes.

NEXT -- Continue to next step.

2. RECHECK FOR DTC

(a) Recheck for DTCs and check if the same trouble occurs again.

OK:

Malfunction disappears.

NG -- REPLACE RADIO RECEIVER Removal

OK -- END