B2795

ENGINE IMMOBILISER: ENGINE IMMOBILISER SYSTEM (w/o Smart Key System): B2795: Unmatched Key Code
B2795 - Unmatched Key Code

DESCRIPTION

This DTC is output when a key with a key code that has not been registered in the ECU is inserted into the ignition key cylinder.





INSPECTION PROCEDURE

NOTICE:
If the key is replaced, register the key Engine Immobiliser System (W/O Smart Key System).

PROCEDURE

1. RE-REGISTER KEY

(a) Delete the DTCs Engine Immobiliser System (w/o Smart Key System).

(b) Re-register the key Engine Immobiliser System (W/O Smart Key System) and insert this key into the ignition key cylinder. Check that the engine starts with this key.

OK:

The engine starts.

NG -- REPLACE KEY

OK -- END