Installation (to 12/2010)

2GR-FE STARTING: ENGINE SWITCH (w/ Smart Key System): INSTALLATION

1. INSTALL ENGINE SWITCH

(a) Install the engine switch.

(b) Connect the engine switch connector.

2. INSTALL INSTRUMENT PANEL AIR BAG ASSEMBLY LOWER NO.1

3. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER LH

4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

5. INSTALL FRONT DOOR SCUFF PLATE LH

6. CONNECT BATTERY NEGATIVE TERMINAL

7. INSPECT SRS WARNING LIGHT

HINT
Diagnosis System (to 12/2010)

8. PERFORM INITIALIZATION

HINT
Repair Instruction - Initialization

(a) Some systems need initialization when disconnecting the battery terminal.