Removal (from 12/2010)

LIGHTING: HAZARD WARNING SWITCH: REMOVAL

1. REMOVE CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL Removal (from 12/2010)

2. REMOVE INTEGRATION CONTROL AND PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System) Removal (from 12/2010)

3. REMOVE INTEGRATION CONTROL AND PANEL WITH NAVIGATION RECEIVER ASSEMBLY (w/ Navigation System) Removal (from 12/2010)

4. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal (from 12/2010)

5. REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY

(a) Disengage the 2 claws and remove the hazard warning signal switch assembly.