Installation (to 12/2010)

AUDIO / VISUAL: NETWORK GATEWAY ECU: INSTALLATION

1. INSTALL NETWORK GATEWAY ECU

(a) Install the network gateway ECU assembly.

(b) Engage the 2 claws and install the ECU aggregation cover.

(c) Connect the connector.

2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL RH Installation (to 12/2010)

3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation (to 12/2010)

4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

5. INSTALL FRONT DOOR SCUFF PLATE RH

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL