Installation (from 12/2010)

2GR-FE ENGINE CONTROL SYSTEM: VVT SENSOR: INSTALLATION

1. INSTALL VVT SENSOR

(a) Intake camshaft (Bank 1).

(1) Install the VVT sensor with the bolt.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(2) Connect the VVT sensor connector.

(b) Exhaust camshaft (Bank 1).

(1) Install the VVT sensor with the bolt.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(2) Connect the VVT sensor connector.

(3) Install the cowl top outside panel front Installation (from 12/2010).

(4) Install the windshield wiper link assembly Installation.

(c) Exhaust camshaft (Bank 2).

(1) Install the VVT sensor with the bolt.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(2) Connect the VVT sensor connector.

(d) Intake camshaft (Bank 2).

(1) Install the VVT sensor with the bolt.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(2) Connect the VVT sensor connector.

2. INSTALL V-BANK COVER SUB-ASSEMBLY Installation (from 12/2010)