Installation (to 12/2010)

TIRE AND WHEEL: TIRE PRESSURE WARNING RESET SWITCH: INSTALLATION

1. INSTALL TIRE PRESSURE WARNING RESET SWITCH

(a) Engage the 2 claws to install the tire pressure warning reset switch to the No. 2 instrument panel under cover sub-assembly.





2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. INSPECT TIRE PRESSURE WARNING SYSTEM

HINT
Test Mode Procedure (to 12/2010)