Installation (to 12/2010)

LIGHTING: HEADLIGHT DIMMER SWITCH: INSTALLATION

1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY

(a) Install the headlight dimmer switch assembly with the claw as shown in the illustration.





HINT
Make sure that the claw is completely engaged.

(b) Install the headlight dimmer switch assembly with the clamp.





(c) Connect the connector.

2. INSTALL SPIRAL CABLE SUB-ASSEMBLY

3. INSTALL STEERING COLUMN COVER Installation (to 12/2010)

4. INSTALL STEERING COLUMN COVER LWR Installation (to 12/2010)

5. ADJUST SPIRAL CABLE SUB-ASSEMBLY

6. INSTALL STEERING WHEEL ASSEMBLY Installation (to 12/2010)

7. INSPECT STEERING WHEEL CENTER POINT

8. INSTALL HORN BUTTON ASSEMBLY Installation (to 12/2010)

9. INSTALL STEERING WHEEL COVER LOWER NO.2 Installation (to 12/2010)

10. INSTALL STEERING WHEEL COVER LOWER NO.3 Installation (to 12/2010)

11. CONNECT BATTERY NEGATIVE TERMINAL

12. INSPECT HORN BUTTON ASSEMBLY

13. INSPECT SRS WARNING LIGHT

( Precaution (to 12/2010))

14. PERFORM INITIALIZATION

(a) Some systems need initialization when disconnecting the cable from the negative battery terminal ( Repair Instruction - Initialization).