Installation

LIGHTING: HEADLIGHT ASSEMBLY: INSTALLATION

1. INSTALL HEADLIGHT ASSEMBLY

(a) Connect each connector.

(b) Install the headlight assembly with the 2 bolts and screw.

Torque : 3.6 Nm (37 kgf-cm, 32 in-lbf)

2. INSTALL FRONT BUMPER ASSEMBLY

Installation

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. ADJUST HEADLIGHT AIMING

Adjustments

5. ADJUST FOG LIGHT AIMING

Adjustments