Installation

LIGHTING: HEIGHT CONTROL SENSOR: INSTALLATION

1. INSTALL HEIGHT CONTROL SENSOR SUB-ASSEMBLY REAR RH

(a) Install the height control sensor link rear RH with the 2 nuts.

Torque : 8.0 Nm (81 kgf-cm, 71 in-lbf)

(b) Align the matchmarks with the one on the height control sensor sub-assembly rear RH and bracket.

(c) Install the height control sensor sub-assembly rear RH.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(d) Connect the connector.

(e) Install a nut.

(f) When the work like the vehicle height may be changed is performed, for example, removal and installation of the height control sensor, or replacement of the suspension, etc., initialize the sensor, then adjust the optical axis Initialization.

2. VEHICLE PREPARATION FOR HEADLIGHT AIM ADJUSTMENT Adjustments

3. PREPARATION FOR HEADLIGHT AIMING (Using a tester) Adjustments

4. PREPARATION FOR HEADLIGHT AIMING (Using a screen) Adjustments

5. HEADLIGHT AIMING INSPECTION Adjustments

6. HEADLIGHT AIMING ADJUSTMENT Adjustments