Initialization

METER: METER / GAUGE SYSTEM: INITIALIZATION

1. OIL MAINTENANCE WARNING RESETTING PROCEDURE

HINT
The ODO/TRIP change switch is located below the speedometer.

(a) Turn the ignition switch on (IG).

(b) Press the ODO/TRIP change switch until the ODO meter appears.

(c) Turn the ignition switch off.

(d) Turn the ignition switch on (IG) while pressing and holding the ODO/TRIP change switch. Hold the ODO/TRIP change switch for more than 5 seconds.

HINT
* If the ignition switch is turned off during the reset procedure, the odometer and the maintenance indicator go off.
* If the reset switch is not pressed for at least 5 seconds during the reset procedure, the LCD returns to the ODO meter and maintenance indicator returns to the previous state.