Removal (to 12/2010)

METER: COMBINATION METER: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL Removal (to 12/2010)

3. REMOVE INSTRUMENT PANEL FINISH PLATE (w/o Smart Key System) Removal (to 12/2010)

4. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY Removal (to 12/2010)

5. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal (to 12/2010)

6. REMOVE COMBINATION METER ASSEMBLY

(a) Remove the 4 screws.





(b) Disconnect the connector and remove the combination meter assembly.