DTC Check / Clear (to 12/2010)

CRUISE CONTROL: CRUISE CONTROL SYSTEM: DTC CHECK / CLEAR

1. DTC CHECK

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Powertrain / Cruise Control / Trouble Codes.

(e) Check the details of the DTC(s) Diagnostic Trouble Code Chart (to 12/2010).

2. DTC CLEAR

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Powertrain / Cruise Control / Trouble Codes.

(e) Clear the DTCs.