Installation

BRAKE: REAR BRAKE: INSTALLATION

1. INSTALL REAR DISC BRAKE CYLINDER ASSEMBLY

(a) Install the rear disc brake cylinder assembly with the 2 bolts.

Torque : 27 Nm (275 kgf-cm, 20 ft-lbf)





2. CONNECT REAR BRAKE FLEXIBLE HOSE

(a) Connect the rear brake flexible hose with the union bolt and a new gasket.





Torque : 33 Nm (337 kgf-cm, 24 ft-lbf)

3. FILL RESERVOIR WITH BRAKE FLUID Service and Repair

4. BLEED BRAKE LINE Service and Repair

5. INSPECT FOR BRAKE FLUID LEAK

6. INSPECT FLUID LEVEL IN RESERVOIR Service and Repair

7. INSTALL REAR WHEEL

Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)