Removal (to 12/2010)

AUDIO / VISUAL: RADIO RECEIVER: REMOVAL

1. REMOVE CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL Removal (to 12/2010)

2. REMOVE INTEGRATION CONTROL AND PANEL WITH RADIO RECEIVER ASSEMBLY

(a) Apply protective tape as shown in the illustration.





Text in Illustration





(b) Remove the 4 bolts.





(c) Disengage the 4 clips.





(d) Disconnect each connector and remove the integration control and panel with radio receiver assembly.

3. REMOVE NO. 1 RADIO BRACKET

(a) Remove the 4 bolts and 2 screws to remove the No. 1 radio bracket.





Text in Illustration





4. REMOVE NO. 2 RADIO BRACKET

(a) Remove the 4 bolts and 2 screws to remove the No. 2 radio bracket.





Text in Illustration





5. REMOVE RADIO RECEIVER ASSEMBLY

(a) Slide the radio receiver assembly in the direction shown by the arrow to remove the radio receiver assembly.