Vehicle Position Mark Deviates Greatly (from 12/2010)

NAVIGATION: NAVIGATION SYSTEM: Vehicle Position Mark Deviates Greatly
- Vehicle Position Mark Deviates Greatly

INSPECTION PROCEDURE

PROCEDURE

1. CHECK GPS MARK

(a) Check that the GPS mark is displayed.





OK:

GPS mark is displayed.

Text in Illustration





NG -- GO TO "GPS MARK IS NOT DISPLAYED" IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table (from 12/2010)
OK -- Continue to next step.

2. CHECK VEHICLE SENSOR (OPERATION CHECK)

(a) Enter the "Vehicle Sensors" (Check GPS & Vehicle Sensors) Operation Check (from 12/2010).





(b) While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check that these readings are almost equal.

OK:

The readings are almost equal.

NG -- CHECK DTC OUTPUT DTC Check / Clear (from 12/2010)
OK -- Continue to next step.

3. CHECK VEHICLE SIGNAL (OPERATION CHECK)

(a) Enter the "Vehicle Signal Check Mode" (Check Vehicle Signal) Operation Check (from 12/2010).

(b) Check that the display changes between ON and OFF according to the shift lever operation.





OK:





HINT
The display is updated once per second. It is normal for the display to lag behind the actual switch operation.

NG -- GO TO "REVERSE SIGNAL DOES NOT CHANGE IN VEHICLE SIGNAL CHECK MODE" IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table (from 12/2010)

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table (from 12/2010)