Panel Switches Do Not Function (from 12/2010)

NAVIGATION: NAVIGATION SYSTEM: Panel Switches do not Function
- Panel Switches do not Function

INSPECTION PROCEDURE

PROCEDURE

1. CHECK PANEL SWITCH

(a) Check for foreign matter around the switches that might prevent operation.

OK:

No foreign matter is found.

NG -- REMOVE ANY FOREIGN MATTER FOUND
OK -- Continue to next step.

2. CHECK PANEL SWITCH (OPERATION CHECK)





(a) Enter the "Panel & Steering Switch Check Mode" (Check Panel & Steering Switch) Operation Check (from 12/2010).

(b) Operate the abnormal switch and check if the switch name and status are correctly displayed.

OK:

The switch name and status are correctly displayed as operated.

NG -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table (from 12/2010)

OK -- REPLACE NAVIGATION RECEIVER ASSEMBLY Removal (from 12/2010)