Current Position Display Does Not Appear (from 12/2010)

NAVIGATION: NAVIGATION SYSTEM: Current Position Display does not Appear
- Current Position Display does not Appear

INSPECTION PROCEDURE

PROCEDURE

1. CHECK NAVIGATION RECEIVER ASSEMBLY

(a) Display the "Map DVD" screen.

(b) Check if a disc is inserted into the map disc slot.





(1) Check if the map data version is displayed in the "Map Data" section.

OK:

The map data version is displayed.

Text in Illustration





NG -- INSERT MAP DISC IN MAP DISC SLOT
OK -- Continue to next step.

2. CHECK MAP DISC

(a) Check that the map disc is not deformed or cracked.





OK:

No deformations or cracks on the map disc

NG -- REPLACE MAP DISC

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table (from 12/2010)