CD Sound Skips (to 12/2010)

NAVIGATION: NAVIGATION SYSTEM: CD Sound Skips
- CD Sound Skips

INSPECTION PROCEDURE

PROCEDURE

1. CHECK CD

(a) Check that the CD is not deformed or cracked.





OK:

No deformation or cracks on the CD.

NG -- CD IS FAULTY
OK -- Continue to next step.

2. CHECK CD

(a) Check for dirt on the CD surface.





OK:

No dirt is on the CD surface.

NOTICE:
Do not use a conventional record cleaner or anti-static preservative.

HINT
If the CD is dirty, clean the CD by wiping the disc's surface radially with a soft cloth.

NG -- CLEAN CD
OK -- Continue to next step.

3. CHECK OPERATION WITH ANOTHER CD

(a) Replace the CD with a normal one and check that the same problem does not occur.

OK:

The same problem does not occur.

NG -- CHECK NAVIGATION RECEIVER ASSEMBLY

OK -- CD WAS FAULTY

4. CHECK NAVIGATION RECEIVER ASSEMBLY

(a) Check the navigation receiver assembly installation condition.

(1) Check that the navigation receiver assembly is properly installed.

OK:

The navigation receiver assembly is properly installed.

NG -- REINSTALL NAVIGATION RECEIVER ASSEMBLY Installation (to 12/2010)

OK -- REPLACE NAVIGATION RECEIVER ASSEMBLY Removal (to 12/2010)