Removal (from 12/2010)

NAVIGATION: NAVIGATION RECEIVER: REMOVAL

1. REMOVE CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL Removal (from 12/2010)

2. REMOVE INTEGRATION CONTROL AND PANEL WITH NAVIGATION RECEIVER ASSEMBLY

(a) Apply protective tape as shown in the illustration.

Text in Illustration

(b) Remove the 4 bolts.

(d) Disconnect each connector and remove the integration control and panel with navigation receiver assembly.

3. REMOVE NO. 1 RADIO BRACKET

(a) Remove the 4 bolts and 2 screws to remove the No. 1 radio bracket.

Text in Illustration

4. REMOVE NO. 2 RADIO BRACKET

(a) Remove the 4 bolts and 2 screws to remove the No. 2 radio bracket.

Text in Illustration

5. REMOVE NAVIGATION RECEIVER ASSEMBLY

(a) Slide the navigation receiver assembly in the direction shown by the arrow to remove the navigation receiver assembly.