Installation (to 12/2010)

NAVIGATION: NAVIGATION RECEIVER: INSTALLATION

1. INSTALL NAVIGATION RECEIVER ASSEMBLY

(a) Slide the navigation receiver assembly in the direction shown by the arrow to install the navigation receiver assembly.





2. INSTALL NO. 2 RADIO BRACKET

(a) Install the No.2 radio bracket with the 4 bolts and 2 screws.

3. INSTALL NO. 1 RADIO BRACKET

(a) Install the No.1 radio bracket with the 4 bolts and 2 screws.

4. INSTALL INTEGRATION CONTROL AND PANEL WITH NAVIGATION RECEIVER ASSEMBLY

(a) Connect each connector.

(b) Engage the 4 clips.

(c) Install the integration control and panel with navigation receiver assembly with the 4 bolts.

5. INSTALL CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL Installation (to 12/2010)