DTC Check / Clear (to 12/2010)

ENGINE IMMOBILISER: ENGINE IMMOBILISER SYSTEM: DTC CHECK / CLEAR

1. CHECK DTC

(a) Connect Techstream to the DLC3.

(b) Turn the ignition switch ON.

(c) Turn the tester on.

(d) Enter the following menus: Body Electrical / Immobiliser or Engine / Trouble Codes.

(e) Check the details of the DTC (s) Diagnostic Trouble Code Chart (to 12/2010).

2. CLEAR DTC

(a) Connect Techstream to the DLC3.

(b) Turn the ignition switch ON.

(c) Turn the tester on.

(d) Enter the following menus: Body Electrical / Immobiliser or Engine / Trouble Codes.

(e) Erase the DTCs.