Installation (from 12/2010)

ENGINE IMMOBILISER: TRANSPONDER KEY ECU (w/o Smart Key System): INSTALLATION

1. INSTALL TRANSPONDER KEY ECU ASSEMBLY

(a) Connect the connector.





(b) Engage the 3 claws and install the transponder key ECU assembly.

NOTICE:
Be careful when installing the transponder key ECU assembly. If the transponder key ECU assembly is dropped, replace it with a new one.

2. INSTALL AIR CONDITIONER UNIT ASSEMBLY

HINT
Refer to the procedure from Install Air Conditioner Unit Assembly Installation (from 12/2010).

3. REGISTER ECU COMMUNICATION ID

NOTICE:
When replacing the transponder key ECU assembly, perform initialization Engine Immobiliser System.

4. REGISTER KEY

NOTICE:
When replacing the transponder key ECU assembly, perform initialization Engine Immobiliser System.