Navigation System (from 12/2010)

NAVIGATION: NAVIGATION SYSTEM: U0073: Control Module Communication Bus Off
U0073 - Control Module Communication Bus Off

DESCRIPTION

This DTC is stored when a CAN communication circuit malfunction is detected by navigation receiver assembly self check.





INSPECTION PROCEDURE

PROCEDURE

1. CHECK DTC

(a) Clear the DTCs DTC Check / Clear (from 12/2010).

(b) Recheck for DTCs and check if the same DTC is output again.

OK:

No DTCs are output.

NG -- GO TO CAN COMMUNICATION SYSTEM Initial Inspection and Diagnostic Overview

OK -- USE SIMULATION METHOD TO CHECK How To Proceed With Troubleshooting