Audio and Visual System (to 12/2010)

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: C0-40,C0-41: Antenna not Connected
C0-41 - Antenna Shorted

DESCRIPTION





INSPECTION PROCEDURE

HINT
After the inspection is completed, clear the DTCs.

PROCEDURE

1. CHECK CONNECTOR CONNECTION CONDITION

(a) Check that the satellite radio antenna cord is securely connected to the radio receiver assembly connector.

OK:

The cord is securely connected.

NG -- RECONNECT CONNECTOR CORRECTLY
OK -- Continue to next step.

2. REPLACE SATELLITE RADIO ANTENNA ASSEMBLY

(a) Replace the satellite radio antenna assembly Removal (to 12/2010).

(b) Clear the DTCs DTC Check / Clear (to 12/2010).

(c) Recheck for DTCs and check if the same DTC is output again.

OK:

No DTCs are output.

NG -- REPLACE RADIO RECEIVER ASSEMBLY Removal (to 12/2010)

OK -- END