Engine Immobiliser System (from 12/2010)

ENGINE IMMOBILISER: ENGINE IMMOBILISER SYSTEM: B2793: Transponder Chip Malfunction
B2793 - Transponder Chip Malfunction

DESCRIPTION

This DTC is output when: 1) during the key code registration, a key malfunction occurs; or 2) the key code was unable to be registered properly. Follow the inspection procedure below.





INSPECTION PROCEDURE

PROCEDURE

1. RE-REGISTER KEY

(a) Delete the DTC DTC Check / Clear (from 12/2010).

(b) Re-register the key Engine Immobiliser System, and check that the engine starts with the key.

OK:

Engine starts.

NG -- REPLACE KEY

OK -- END