Installation

2GR-FE ENGINE CONTROL: ACTIVE CONTROL ENGINE MOUNT: INSTALLATION

1. INSTALL FRONT ENGINE MOUNTING INSULATOR ASSEMBLY

(a) Install the front engine mounting insulator assembly with the 3 nuts.





Torque : 52 Nm (530 kgf-cm, 38 ft-lbf)

(b) Connect the duty vacuum switching valve connector and clamp.





2. INSTALL TRANSVERSE ENGINE MOUNTING BRACKET

(a) Install the transverse engine mounting bracket with the 4 bolts.

Text in Illustration:

Torque : 87 Nm (887 kgf-cm, 64 ft-lbf for Bolt A)

Torque : 64 Nm (653 kgf-cm, 47 ft-lbf for Bolt B)

3. INSTALL RADIATOR ASSEMBLY AND FAN ASSEMBLY WITH MOTOR

(a) Install the radiator assembly and fan assembly with motor Installation.