Installation

SEAT BELT: CHILD RESTRAINT SEAT TETHER ANCHOR: INSTALLATION

1. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET

(a) Engage the guide.





(b) Install the child restraint seat tether anchor bracket with the bolt.

Torque : 31 Nm (316 kgf-cm, 23 ft-lbf)

HINT
Use the same procedure for the other 2 child restraint seat tether anchor brackets.

2. INSTALL REAR SEAT SUB FLOOR PANEL ASSEMBLY Installation

3. INSTALL NO. 1 DECK BOARD Installation

4. INSTALL DECK SIDE TRIM BOX RH Installation

5. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY Installation

6. INSTALL DECK SIDE TRIM BOX LH Installation

7. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY Installation

8. INSTALL DECK BOARD ASSEMBLY Installation