Installation

SEAT: FRONT SEAT CUSHION HEATER: INSTALLATION

1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER

(a) Using a tacker, install the separate type front seat cushion heater to the end of the separate type front seat cushion cover with 25 new tack pins.





NOTICE:
Be careful not to damage the cushion.

(b) Using hog ring pliers, temporarily install the separate type front seat cover with 18 new hog rings.

Text in Illustration:

NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, take care to minimize wrinkles as much as possible.
2. INSTALL FRONT SEAT CUSHION COVER WITH PAD Reassembly

3. INSTALL POWER SEAT SWITCH Reassembly

4. INSTALL FRONT SEAT CUSHION INNER SHIELD Reassembly

5. INSTALL FRONT SEAT INNER BELT ASSEMBLY Installation

6. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY Reassembly

7. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB Reassembly

8. INSTALL RECLINING POWER SEAT SWITCH KNOB Reassembly

9. INSTALL FRONT SEAT ASSEMBLY Installation

10. INSTALL FRONT SEAT REAR INNER TRACK COVER Installation

11. INSTALL FRONT SEAT REAR OUTER TRACK COVER Installation

12. INSTALL FRONT SEAT HEADREST ASSEMBLY Installation

13. INSPECT FRONT SEAT ASSEMBLY Installation

14. INSPECT SRS WARNING LIGHT

Diagnosis System