Instrument Panel Speaker

AUDIO / VIDEO: INSTRUMENT PANEL SPEAKER: ON-VEHICLE INSPECTION

1. INSPECT FRONT NO. 3 SPEAKER (for 7 Speakers)

HINT
Remove interior parts so that the front No. 3 speaker can be seen.

(a) Check the speaker installation.

OK:

The speaker is securely installed.

(b) If the result is not as specified, reinstall the front No. 3 speaker.

(c) Visually check the speaker.

OK:

The cone paper of the speaker is not torn.

(d) If the result is not as specified, replace the front No. 3 speaker.

(e) Speaker resistance check





(1) Disconnect the front No. 3 speaker connector.

(2) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





(3) If the result is not as specified, replace the front No. 3 speaker.