Removal

AUDIO / VIDEO: RADIO ANTENNA CORD: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH Removal

3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH Removal

4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

6. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY Removal

7. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Removal

8. REMOVE COMBINATION METER ASSEMBLY Removal

9. REMOVE FRONT PILLAR GARNISH LH (w/o Curtain Shield Airbag) Removal

10. REMOVE FRONT PILLAR GARNISH LH (w/ Curtain Shield Airbag) Removal

11. REMOVE FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag) Removal

12. REMOVE FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag) Removal

13. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Removal

14. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH Removal

15. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

16. REMOVE NO. 1 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY Removal

17. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH Removal

18. DISCONNECT INSTRUMENT PANEL WIRE ASSEMBLY Removal

19. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY Removal

20. REMOVE RADIO RECEIVER WITH BRACKET (w/o Navigation System) Removal

21. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/ Navigation System) Removal

22. REMOVE NAVIGATION RECEIVER WITH BRACKET (w/ Navigation System) Removal

23. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY

(a) Disconnect the connector.

(b) Disengage the clamp.

(d) Disconnect the connector.

(e) Disengage the 5 clamps and remove the No. 2 antenna cord sub-assembly.