Removal

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ANTENNA: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH Removal

3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH Removal

4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

6. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY Removal

7. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Removal

8. REMOVE COMBINATION METER ASSEMBLY Removal

9. REMOVE FRONT PILLAR GARNISH LH (w/o Curtain Shield Airbag) Removal

10. REMOVE FRONT PILLAR GARNISH LH (w/ Curtain Shield Airbag) Removal

11. REMOVE FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag) Removal

12. REMOVE FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag) Removal

13. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Removal

14. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH Removal

15. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

16. REMOVE NO. 1 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY Removal

17. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH Removal

18. DISCONNECT INSTRUMENT PANEL WIRE ASSEMBLY Removal

19. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY Removal

20. REMOVE DEFROSTER NOZZLE ASSEMBLY Disassembly

21. REMOVE NO. 2 HEATER TO REGISTER DUCT Disassembly

22. REMOVE NO. 1 HEATER TO REGISTER DUCT Disassembly

23. REMOVE NO. 3 HEATER TO REGISTER DUCT Disassembly

24. REMOVE NO. 2 INSTRUMENT PANEL CUSHION Disassembly

25. REMOVE NAVIGATION ANTENNA ASSEMBLY

(a) Disengage the 2 clamps.





(b) Remove the 3 screws and navigation antenna assembly.