Removal

SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Manual Seat)
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE FRONT SEAT HEADREST ASSEMBLY (for Manual Seat) Removal
3. REMOVE FRONT SEAT REAR OUTER TRACK COVER (for Manual Seat) Removal
4. REMOVE FRONT SEAT REAR INNER TRACK COVER (for Manual Seat) Removal
5. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat) Removal
6. REMOVE FRONT SEAT HEADREST ASSEMBLY (for Power Seat) Removal
7. REMOVE FRONT SEAT REAR OUTER TRACK COVER (for Power Seat) Removal
8. REMOVE FRONT SEAT REAR INNER TRACK COVER (for Power Seat) Removal
9. REMOVE FRONT SEAT ASSEMBLY (for Power Seat) Removal
10. REMOVE FRONT SEAT INNER BELT ASSEMBLY
(a) Disconnect each connector and disengage each clamp.





(b) Remove the nut and the front seat inner belt assembly.