Installation

WIPER / WASHER: WASHER LEVEL WARNING SWITCH: INSTALLATION

INSTALLATION

1. INSTALL LEVEL WARNING SWITCH ASSEMBLY





(a) Install the level warning switch assembly.
(b) Connect the connector.
2. FILL WASHER JAR WITH WASHER FLUID Installation
3. INSTALL FRONT BUMPER ASSEMBLY Installation
4. INSTALL NO. 4 ENGINE UNDER COVER (for 2AZ-FE) Installation
5. INSTALL RADIATOR GRILLE PROTECTOR Installation
6. VEHICLE PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light) Adjustments
7. PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light) Adjustments
8. INSPECT FOG LIGHT AIMING (w/ Fog Light) Adjustments
9. ADJUST FOG LIGHT AIMING (w/ Fog Light) Adjustments