Removal

SEAT BELT: REAR SEAT INNER BELT ASSEMBLY (for Coupe):

REMOVAL

HINT:
- The installation procedures are the removal procedures in reverse order. However, only installation procedures requiring additional information are included.
- A bolt without a torque specification is shown in the standard bolt chart (Standard Bolt - Specified Torque For Standard Bolts).
- CRS stands for child restraint seat.

1. REMOVE REAR SEAT CUSHION ASSEMBLY (Removal)

2. REMOVE REAR SEATBACK ASSEMBLY LH (Removal)

3. REMOVE REAR SEATBACK ASSEMBLY RH (Removal)

4. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH (Removal)

5. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY RH (Removal)

6. REMOVE FRONT DOOR SCUFF PLATE LH (Removal)

7. REMOVE FRONT DOOR SCUFF PLATE RH (Removal)

8. REMOVE QUARTER TRIM PANEL ASSEMBLY FRONT LH
9. REMOVE QUARTER TRIM PANEL ASSEMBLY FRONT RH
10. REMOVE CENTER PILLAR GARNISH LH (Removal)

11. REMOVE CENTER PILLAR GARNISH RH (Removal)

12. REMOVE ROOF SIDE GARNISH ASSEMBLY INNER LH (Removal)

13. REMOVE ROOF SIDE GARNISH ASSEMBLY INNER RH (Removal)

14. REMOVE QUARTER TRIM PANEL UPPER LH
15. REMOVE QUARTER TRIM PANEL UPPER RH
16. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY





(a) Disengage the 2 clips, 5 claws and package tray trim, as shown in the illustration.
17. REMOVE CRS ANCHOR BRACKET LH
(a) Remove the 2 nuts and anchor bracket.
18. REMOVE CRS ANCHOR BRACKET RH
(a) Remove the 2 nuts and anchor bracket.
19. REMOVE REAR SEAT INNER W/CENTER BELT ASSEMBLY LH
(a) Remove the 2 bolts and inner belt.
20. REMOVE REAR SEAT INNER W/CENTER BELT ASSEMBLY RH
(a) Remove the nut and inner belt.
21. REMOVE CRS TETHER ANCHOR BRACKET
(a) Remove the 3 bolts and 3 anchor brackets.