Installation

BRAKE CONTROL: FRONT SPEED SENSOR:

INSTALLATION

1. INSTALL SPEED SENSOR FRONT LH





(a) Install the speed sensor front LH with the bolt.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)

NOTE: Prevent foreign matter from attaching to the sensor tip.





(b) Install the sensor harness clamps with the 2 bolts "A" and "B" to the body and shock absorber.
Bolt A - Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
Bolt B - Torque: 19 Nm (192 kgf-cm, 14 ft-lbf)
(c) Connect the clamp to the knuckle.





(d) Connect the speed sensor connector and clamp.
2. INSTALL FRONT FENDER LINER LH
3. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft-lbf)
4. CHECK ABS SPEED SENSOR SIGNAL

HINT: (Test Mode Procedure) for ABS system, (Test Mode Procedure) for VSC system