Reassembly

A246E AUTOMATIC TRANSAXLE: UNDERDRIVE CLUTCH: REASSEMBLY

REASSEMBLY

1. INSTALL UNDERDRIVE CLUTCH PISTON SUB-ASSEMBLY

(a) Coat the 2 new underdrive clutch piston O-rings with ATF and install 2 new underdrive clutch piston O-rings to the underdrive clutch piston sub-assembly.

(b) Install the underdrive clutch piston sub-assembly in to the underdrive clutch drum sub-assembly.

NOTE: Be careful not to damage the underdrive clutch piston O- rings.

2. INSTALL UNDERDRIVE CLUTCH RETURN SPRING SUB-ASSEMBLY

(a) Install the underdrive clutch return spring plate and underdrive clutch return spring sub-assembly to the underdrive clutch drum sub-assembly.
3. INSTALL UNDERDRIVE RETURN SPRING SHAFT SNAP RING

(a) Using SST and a press, compress the return spring retainer.
SST: 09350-32014
09351-32070
(b) Using snap ring pliers, install the underdrive return spring shaft snap ring to the underdrive clutch drum sub-assembly.
SST: 09350-32014
09351-32070

(a) Install the 3 plates and 3 underdrive clutch disc No.1s to the underdrive clutch drum sub-assembly.
Install in order :
F = Flange D = Disc P = Plate P - D - P - D - P - D - F
(b) Install the flange with the flat side facing downward.
5. INSTALL UNDERDRIVE CLUTCH FLANGE NO.1 HOLE SNAP RING

(a) Using a screwdriver, install the underdrive clutch flange No.1 hole snap ring to the underdrive clutch drum sub- assembly.