Reassembly

A246E AUTOMATIC TRANSAXLE: SECOND COAST BRAKE: REASSEMBLY

REASSEMBLY

1. INSTALL 2ND COAST BRAKE PISTON ROD





(a) Install the 2nd coast brake piston plate washer and 2nd coast brake piston compression spring to the 2nd coast brake piston rod.
(b) Install the 2nd coast brake piston.





(c) Install an E-ring with needle-nose pliers while pushing the 2nd coast brake piston.
2. INSTALL 2ND COAST BRAKE PISTON OIL SEAL RING





(a) Coat the 2nd coast brake piston oil seal ring with ATF and install the 2nd coast brake piston oil seal ring to the 2nd coast brake piston assembly.

NOTE: Do not spread the ring ends more than necessary.