Disassembly

A246E AUTOMATIC TRANSAXLE: FORWARD CLUTCH: DISASSEMBLY

DISASSEMBLY

1. INSPECT PISTON STROKE OF FORWARD CLUTCH (Forward Clutch)

2. REMOVE FORWARD CLUTCH FLANGE HOLE SNAP RING





(a) Using a screwdriver, remove the forward clutch flange hole snap ring from the input shaft sub-assembly.
3. REMOVE FORWARD MULTIPLE DISC CLUTCH CLUTCH DISC





(a) Remove the clutch flange, 4 forward multiple disc clutch clutch discs and 4 plates from the input shaft sub-assembly.
4. REMOVE FORWARD CLUTCH PISTON RETURN SPRING SHAFT SNAP RING





(a) Place SST on the spring retainer and compress the springs with press.
SST: 09350-32014
09351-32070
(b) Using snap ring pliers, remove the forward clutch piston return spring shaft snap ring from the input shaft sub-assembly.
5. REMOVE FORWARD CLUTCH RETURN SPRING SUB-ASSEMBLY





(a) Remove the forward clutch return spring sub-assembly from the input shaft sub-assembly.
6. REMOVE FORWARD CLUTCH PISTON SUB-ASSEMBLY





(a) Apply compressed air into the oil passage to remove the forward clutch piston sub-assembly.
If the forward clutch piston sub-assembly does not come out, use needle-nose pliers to remove it.





(b) Using a screwdriver, remove the 2 O-rings from the forward clutch piston sub-assembly.
7. REMOVE INPUT SHAFT OIL SEAL RING





(a) Remove the 3 input shaft oil seal rings from the input shaft sub-assembly.
8. INSPECT FORWARD CLUTCH PISTON SUB-ASSEMBLY (Forward Clutch)

9. INSPECT FORWARD MULTIPLE DISC CLUTCH CLUTCH DISC (Forward Clutch)