Disassembly
A246E AUTOMATIC TRANSAXLE: COUNTER SHAFT: DISASSEMBLY
DISASSEMBLY
1. REMOVE UNDERDRIVE PLANETARY SUN GEAR SUB-ASSEMBLY
(a) Remove the underdrive planetary sun gear sub-assembly from the counter shaft assembly.
2. REMOVE UNDERDRIVE PLANETARY SUN GEAR HOLE SNAP RING
(a) Using snap ring pliers, remove the underdrive planetary sun gear hole snap ring from the underdrive planetary sun gear sub-assembly.
3. REMOVE UNDERDRIVE PLANETARY GEAR HOLE SNAP RING
(a) Using a screwdriver, remove the underdrive planetary gear hole snap ring from the counter shaft assembly.
4. REMOVE UNDERDRIVE PLANETARY GEAR ASSEMBLY
(a) Remove the underdrive planetary gear assembly from the counter shaft assembly.
5. REMOVE UNDERDRIVE INPUT SHAFT NEEDLE ROLLER BEARING
(a) Remove the underdrive input shaft needle roller bearing from the counter shaft assembly.
6. REMOVE UNDERDRIVE INPUT SHAFT THRUST BEARING RACE
(a) Remove the underdrive input shaft thrust bearing race from the counter shaft assembly.
7. INSPECT COUNTER SHAFT ASSEMBLY (Counter Shaft)
8. REMOVE UNDERDRIVE INPUT SHAFT NUT
(a) Using a chisel and hammer, unstake the underdrive input shaft nut.
(b) Using SST, remove the underdrive input shaft nut.
SST: 09350-32014
09351-32170
9. REMOVE DIFFERENTIAL DRIVE PINION
(a) Using SST, remove the differential drive pinion with output differential drive pinion, underdrive cylinder roller bearing and front drive pinion front tapered roller bearing.
SST: 09950-40011
09951-04010
09952-04010
09953-04030
09954-04010
09955-04061
09957-04010
09958-04011
(b) Remove the front differential drive pinion bearing spacer from the counter shaft assembly.
10. REMOVE UNDERDRIVE PLANETARY RING GEAR
(a) Using a screwdriver, remove the snap ring from the counter shaft assembly.
(b) Remove the underdrive planetary ring gear from the counter shaft assembly.
11. REMOVE FRONT DRIVE PINION REAR TAPERED ROLLER BEARING
(a) Using SST and a press, remove the front drive pinion rear tapered roller bearing from the counter shaft assembly.
SST: 09950-00020
(b) Using a brass bar and hammer, tap out the front drive pinion rear tapered roller bearing outer race.
12. INSPECT UNDERDRIVE PLANETARY SUN GEAR SUB-ASSEMBLY (Counter Shaft)
13. INSPECT UNDERDRIVE PLANETARY GEAR ASSEMBLY (Counter Shaft)