Removal

A246E AUTOMATIC TRANSAXLE: FLOOR SHIFT PARKING LOCK CABLE ASSEMBLY:

COMPONENTS













REMOVAL

1. REMOVE METER HOOD SUB-ASSEMBLY
2. REMOVE STEERING COLUMN COVER (Removal)

3. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER

HINT: (Removal)

4. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CTR

HINT: (Removal)

5. REMOVE INSTRUMENT PANEL BOX

HINT: (Removal)

6. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER

HINT: (Removal)

7. REMOVE FLOOR SHIFT PARKING LOCK CABLE ASSEMBLY





(a) Push the claw and disconnect the parking lock cable assembly from the shift lock release link.





(b) Using a screwdriver, disconnect the parking lock cable assembly from the shift lever plate.

HINT: Tape up the screwdriver tip before use.





(c) Disconnect the cable clamp.
(d) Turn the ignition switch ACC or ON.





(e) Using a screwdriver, disconnect the cable from the upper bracket.

HINT: Tape up the screwdriver tip before use.