Installation

AXLE: REAR AXLE HUB BOLT:

COMPONENTS





INSTALLATION

1. INSTALL REAR AXLE LH HUB BOLT





(a) Install a washer and nut to a new LH hub bolt as shown in the illustration.
(b) Using a hammer handle or an equivalent to hold the hub & bearing assembly, install the LH hub bolt by tightening the nut.
2. INSTALL REAR BRAKE DRUM SUB-ASSEMBLY (for Rear Drum Brake)
3. INSTALL REAR DISC (DISC REAR RAKE TYPE) (Installation)

4. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY LH (DISC REAR BRAKE TYPE) (Installation)

5. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft-lbf)