Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING RESET SWITCH:

COMPONENTS





INSTALLATION

1. INSTALL TIRE PRESSURE WARNING RESET SWITCH





(a) Connect the connector to the tire pressure warning reset switch.





(b) Engage the 2 claws to install the tire pressure warning reset switch to the lower instrument panel sub-assembly.
2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (Installation)

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. INITIALIZE SYSTEM

NOTE: Be sure to inflate all tires to the proper inflation pressure before initialization.

HINT: (Initialization).

5. INSPECT TIRE PRESSURE WARNING SYSTEM
HINT: (Test Mode Procedure).