Reassembly

SUSPENSION: REAR AXLE BEAM:

COMPONENTS





REASSEMBLY

1. INSTALL REAR AXLE CARRIER BUSH LH
(a) Align the matchmarks on the rear axle beam assembly with the 2 notches of a new bushing and temporarily install the bushing to the rear axle beam assembly.





(b) Using SST, install the bushing to the axle beam.
SST: 09950-40011
09951-04020
09952-04010
09953-04030
09954-04020
09955-04051
09957-04010
09958-04011
SST: 09950-60010
09951-00620
SST: 09710-04101

- Hang the claw of SST to the bushing deeply and firmly.
- Do not scratch the rubber portion of the bushing.
- Do not deform the bushing rib.