Disassembly

SUSPENSION: REAR AXLE BEAM:

COMPONENTS





DISASSEMBLY

1. REMOVE REAR AXLE CARRIER BUSH LH
(a) Make matchmarks on the 2 notches of the bushing and axle beam.
(b) Using a chisel and a hammer, bend the 2 portions of the bushing rib.

HINT: Bend the bushing rib until the claw of SST can be hung.





(c) Using SST, remove the bushing from the axle beam.
SST: 09950-40011
09951-04020
09952-04010
09953-04030
09954-04020
09955-04051
09957-04010
09958-04011
SST: 09950-60010
09951-00630

NOTE: If the rear axle beam assembly has been scratched, apply the paint.