Removal

SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY:

COMPONENTS










REMOVAL

1. REMOVE REAR DOOR SCUFF PLATE RH (Removal)

2. REMOVE REAR DOOR SCUFF PLATE LH (Removal)

3. REMOVE REAR DOOR OPENING TRIM RH
4. REMOVE REAR DOOR OPENING TRIM LH
5. REMOVE TONNEAU COVER ASSEMBLY
6. REMOVE DECK BOARD NO. 2
7. REMOVE DECK BOARD SUB-ASSEMBLY (Removal)

8. REMOVE DECK FLOOR BOX REAR (Removal)

9. REMOVE LUGGAGE COMPARTMENT TRAY (Removal)

10. REMOVE BACK DOOR WEATHERSTRIP
11. REMOVE DECK TRIM COVER REAR (Removal)

12. REMOVE REAR SEAT CUSHION ASSEMBLY AND REAR SEATBACK ASSEMBLY
13. REMOVE REAR SEAT SIDE GARNISH RH (Removal)

14. REMOVE REAR SEAT SIDE GARNISH LH (Removal)

15. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (Removal)

16. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (Removal)

17. REMOVE REAR SEAT 3 POINT TYPE BELT ASSEMBLY
(a) Using a screwdriver, remove the shoulder anchor cover.

HINT: Tape the screwdriver tip before use.

(b) Remove the bolt and disconnect the rear seat 3 point type belt assembly outer (shoulder anchor side).
(c) Remove the bolt and disconnect the rear seat 3 point type belt assembly RH (floor anchor side).