Installation

SEAT BELT: REAR CENTER SEAT INNER BELT ASSEMBLY:

COMPONENTS










INSTALLATION

1. INSTALL REAR SEAT INNER W/CENTER BELT ASSEMBLY LH





(a) Install the rear seat inner w/center belt assembly LH with the bolt, as shown in the illustration.
Torque: 41.2 Nm (420 kgf-cm, 30 ft-lbf)

- Do not make the anchor part run onto the protruding part of the floor panel.
- Do not disassemble the retractor.

2. INSTALL REAR SEAT CUSHION ASSEMBLY AND REAR SEATBACK ASSEMBLY
3. INSTALL DECK TRIM COVER REAR
4. INSTALL BACK DOOR WEATHERSTRIP
5. INSTALL LUGGAGE COMPARTMENT TRAY
6. INSTALL DECK FLOOR BOX REAR
7. INSTALL DECK BOARD SUB-ASSEMBLY
8. INSTALL DECK BOARD NO. 2
9. INSTALL TONNEAU COVER ASSEMBLY
10. INSTALL REAR DOOR OPENING TRIM LH
11. INSTALL REAR DOOR OPENING TRIM RH
12. INSTALL REAR DOOR SCUFF PLATE LH
13. INSTALL REAR DOOR SCUFF PLATE RH