Removal

SUPPLEMENTAL RESTRAINT SYSTEM: SPIRAL CABLE:

COMPONENTS







REMOVAL

1. PRECAUTION

CAUTION: Be sure to read "PRECAUTION" thoroughly before servicing (Service Precautions).

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
4. REMOVE STEERING PAD (Removal)

5. REMOVE STEERING WHEEL ASSEMBLY (Removal)

6. REMOVE STEERING COLUMN COVER





(a) Remove the 3 screws and steering column lower cover.
7. REMOVE SPIRAL CABLE





(a) Slide the steering column upper cover.
(b) Disconnect the connectors from the spiral cable.

NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.

(c) Disengage the 3 claws and remove the spiral cable.