Console Lamp: Testing and Inspection

LIGHTING: PERSONAL LIGHT ASSEMBLY:

INSPECTION

1. INSPECT PERSONAL LIGHT ASSEMBLY





(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:





(b) Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 3, then check that the illumination comes on when switch operation is ON position.
2. INSPECT PERSONAL LIGHT ASSEMBLY (ELECTRO CHROMIC MIRROR INNER MIRROR)





(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:





(b) Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 6, then check that the illumination comes on when switch operation is ON position.