Removal

1ZZ-FE ENGINE MECHANICAL: ENGINE FRONT OIL SEAL:

COMPONENTS













REMOVAL

1. REMOVE ENGINE UNDER COVER RH
2. REMOVE FRONT WHEEL RH
3. REMOVE FAN AND GENERATOR V BELT
(a) Remove the fan and generator V belt (Removal).
4. REMOVE ENGINE MOUNTING INSULATOR RH
(a) Remove the engine mounting insulator RH (Removal).
5. REMOVE CRANKSHAFT PULLEY
(a) Remove the crankshaft pulley (Removal).
SST: 09960-10010
09962-01000
09963-01000
6. REMOVE TIMING CHAIN OR BELT COVER OIL SEAL





(a) Using a knife, cut off the oil seal lip.
(b) Using a screwdriver with its tip wrapped with tape, pry out the oil seal.

NOTE: After removing, check the crankshaft for damage. If damaged, smooth the surface with 400-grit sandpaper.